Installation To complete this DIY project, you will also need: Lagun Leg System with Sliver Bracket (Sliver bracket can be purchased separately here). 22″ x 15″ x 5/8″ Bamboo Table Top. Swivel Seat (how to install: faroutride.com/swivel-transit) Passenger Side 1. The mount will be installed using these two factory threaded holes located in the Transit B-Pillar: 2. Install the mount plate to the B-Pillar using the two M6 screws provided with this kit: 3. Install the Sliver bracket to the mount plate using the three M8 screws, nuts & washers provided with the Lagun Table (you can use shorter screws as required): 4. Install the leg and arm of your Lagun Leg System, as well as your Bamboo Table Top: Driver Side The factory holes on the Transit B-Pillar driver side are unthreaded, so we first need to add threaded inserts: 1. Install the two M8 rivet-nuts provided with this kit into these two holes in the B-Pillar: 2. It takes just a few seconds with the Astro 1450 tool (more info: Threaded Inserts Guide) : The rest of the installation is identical as for the passenger side! Video: Shipping Ships From: British Columbia, Canada. Carrier: Canada Post / USPS. Cost: Actual carrier shipping rate calculated at checkout. You can combine other items from our Store to save on shipping. wARRANTY & rETURNs Warranty: If there is an issue with your mount plate (manufacturing defect), we’ll be happy to send you another one free of charge! �� Returns: If you ordered by mistake or changed your mind, we can make a refund providing the mount plate is not damaged (no scratches, no cosmetic wear). You are responsible of shipping the product back to us (including the shipping fees associated with it). Wobble: Please watch the video above (at 1:50) and take note of the wobble. If you suspect the wobble will be an issue, please don’t order this mount and look for a different solution. Returns due to wobble are subject to the same conditions as Returns above. Full story: How To Install a Lagun Table on Passenger/Driver Seat
